deploy: 55f6a74e1e

2026-08-09 20:21:43 +00:00 · 2026-06-02 15:46:25 +00:00
parent e3c245b45b
commit 62f74a1ea3
340 changed files with 119915 additions and 0 deletions
@@ -0,0 +1,110 @@
+# ADR-045: AMOLED Display Support for ESP32-S3 CSI Node
+
+## Status
+
+Proposed
+
+## Context
+
+The ESP32-S3 board (LilyGO T-Display-S3 AMOLED) has an integrated RM67162 QSPI AMOLED display (536x240) and 8MB octal PSRAM that were unused by the CSI firmware. Users want real-time on-device visualization of CSI statistics, vital signs, and system health without relying on an external server.
+
+### Constraints
+
+- Binary was 947 KB in a 1 MB partition — needed 8MB flash + custom partition table
+- SPIRAM was disabled in sdkconfig despite hardware having 8MB PSRAM
+- Core 1 is pinned to DSP (edge processing) — display must use Core 0
+- Existing CSI pipeline must not be affected
+
+### Available APIs
+
+Thread-safe edge APIs already exist (`edge_get_vitals()`, `edge_get_multi_person()`) — the display task only reads from these, no new synchronization needed.
+
+## Decision
+
+Add optional AMOLED display support with the following architecture:
+
+### Hardware Abstraction Layer
+
+- `display_hal.c/h`: RM67162 QSPI panel driver + CST816S capacitive touch via I2C
+- Auto-detect at boot: probe RM67162 and check SPIRAM; log warning and skip if absent
+
+### UI Layer
+
+- `display_ui.c/h`: LVGL 8.3 with 4 swipeable views via tileview widget
+- Dark theme (#0a0a0f) with cyan (#00d4ff) accent for three.js-like aesthetic
+- Views: Dashboard (CSI amplitude chart + stats), Vitals (breathing + HR line graphs), Presence (4x4 occupancy grid), System (CPU, heap, PSRAM, WiFi, uptime, FPS)
+
+### Task Layer
+
+- `display_task.c/h`: FreeRTOS task on Core 0, priority 1 (lowest)
+- LVGL pump loop at configurable FPS (default 30)
+- Double-buffered draw buffers allocated in SPIRAM
+
+### Compile-Time Control
+
+- `CONFIG_DISPLAY_ENABLE=y` (default): compiles display code, auto-detects hardware at boot
+- `CONFIG_DISPLAY_ENABLE=n`: zero-cost — no display code compiled
+- `CONFIG_SPIRAM_IGNORE_NOTFOUND=y`: boots fine on boards without PSRAM
+
+### Flash Layout
+
+8MB partition table (`partitions_display.csv`):
+- Dual OTA partitions: 2 x 2MB (supports larger binaries with LVGL)
+- SPIFFS: 1.9MB (for future font/asset storage)
+- NVS + otadata + phy: standard sizes
+
+### Core/Task Layout
+
+| Task | Core | Priority | Impact |
+|------|------|----------|--------|
+| WiFi/LwIP | 0 | 18-23 | unchanged |
+| OTA httpd | 0 | 5 | unchanged |
+| **display_task** | **0** | **1** | **NEW — lowest priority** |
+| edge_task (DSP) | 1 | 5 | unchanged |
+
+### Dependencies
+
+- LVGL ~8.3 (via ESP-IDF managed components)
+- espressif/esp_lcd_touch_cst816s ^1.0
+- espressif/esp_lcd_touch ^1.0
+
+## Consequences
+
+### Positive
+
+- Real-time on-device stats without network dependency
+- Zero impact on CSI pipeline (display reads thread-safe APIs, runs at lowest priority)
+- Graceful degradation: works on boards without display or PSRAM
+- SPIRAM enabled for all boards (benefits WASM runtime too)
+- 8MB flash + dual OTA 2MB partitions give headroom for future features
+
+### Negative
+
+- Binary size increase (~200-300 KB with LVGL)
+- SPIRAM + 8MB flash config is specific to T-Display-S3 AMOLED boards
+- Boards with only 4MB flash need `CONFIG_DISPLAY_ENABLE=n` and the old partition table
+
+### Risks
+
+- RM67162 init sequence is board-specific; other AMOLED panels may need different commands
+- QSPI bus conflicts if other peripherals use SPI2_HOST (currently unused)
+
+## New Files
+
+| File | Purpose |
+|------|---------|
+| `main/display_hal.c/h` | RM67162 QSPI + CST816S touch HAL |
+| `main/display_ui.c/h` | LVGL 4-view UI |
+| `main/display_task.c/h` | FreeRTOS task, LVGL pump |
+| `main/lv_conf.h` | LVGL compile config |
+| `partitions_display.csv` | 8MB partition table |
+| `idf_component.yml` | Managed component deps |
+
+## Modified Files
+
+| File | Change |
+|------|--------|
+| `sdkconfig.defaults` | 8MB flash, SPIRAM, custom partitions |
+| `main/CMakeLists.txt` | Conditional display sources + deps |
+| `main/main.c` | +1 include, +5 lines guarded init |
+| `main/Kconfig.projbuild` | "AMOLED Display" menu |