Factor the router into build_router() (shared by execute + tests) and add
tower-oneshot integration tests (no network/ingest needed):
- health + descriptor → 200
- POST /room/train persists the bank; GET /room/state → 200; train with no
anchors/enrollment → 400
- path-traversal: /room/state?bank=../../etc/passwd → 404 (sanitized, never
reads outside output_dir)
- enroll/status empty; /enroll/anchor with an unknown label → 400
CI regression coverage for the endpoints added this session. 18 CLI tests pass.
Co-Authored-By: claude-flow <ruv@ruv.net>
Closes the last HTTP gap — the appliance can now drive the ENTIRE calibration
pipeline over HTTP without the CLI:
baseline (start/stop) -> enroll/anchor x8 -> room/train -> room/state
- POST /enroll/anchor { room_id, baseline, label, duration_s? }: the ingest task
loads the baseline (sanitized name under output_dir), captures the anchor for
the duration against it (AnchorRecorder + per-frame series), runs the quality
gate, and on completion replies with the verdict + accumulates the AnchorFeature
in an in-server enrollment map keyed by room_id. Re-prompts on rejection.
- GET /enroll/status?room=<id>: accepted anchors, next, complete.
- POST /room/train now falls back to the in-server enrollment when anchors[] is
omitted.
Validated live (ESP32-S3): capture baseline -> enroll stand_still (271 frames,
6s) -> gate correctly rejects "no person detected (presence_z 0.90 < 1.50)"
relative to a same-occupancy baseline (a clean empty-room baseline is the
documented on-target prerequisite). Builds clean; CLI tests pass.
Co-Authored-By: claude-flow <ruv@ruv.net>
- POST /api/v1/room/train: { room_id, baseline_id, anchors[] } → trains a
SpecialistBank and persists it as <output_dir>/<room_id>.json (path-sanitized),
readable via /room/state?bank=<room_id>. Completes the HTTP train→infer loop.
- Fix data-contract bug: AnchorLabel serialized as PascalCase variant names
(serde default) while as_str() + the integration doc used snake_case. Added
#[serde(rename_all = "snake_case")] so the JSON wire format matches the
documented contract (empty/stand_still/…). Locked with a roundtrip test.
Validated live (ESP32-S3): POST train (4 anchors → 6 specialists, persisted) →
GET /room/state returns RoomState with the trained presence/restlessness; the
synthetic-vs-real scale mismatch correctly triggers the anomaly veto. 36
calibration tests pass.
Co-Authored-By: claude-flow <ruv@ruv.net>
Adds a live RoomState readout over HTTP — the appliance UI's main need. The
ingest task maintains a rolling per-frame scalar window (flushed on the 200 ms
tick, no per-frame lock); the handler loads a bank (resolved as a sanitized
name under output_dir — same path-traversal defense as room_id), runs the
MixtureOfSpecialists over the window, returns RoomState JSON.
Validated live (ESP32-S3 via relay): breathing 14-19 BPM over HTTP; a
bank=../../etc/passwd query is neutralized to 'etcpasswd' (no traversal).
Co-Authored-By: claude-flow <ruv@ruv.net>
Resolves the review on #989:
- **Cross-compile (the appliance blocker):** make wifi-densepose-mat optional
and feature-gate it (`mat`), so `cargo build -p wifi-densepose-cli
--no-default-features` excludes the mat→nn→ort(ONNX)→openssl-sys chain.
Verified: `cargo tree --no-default-features` shows 0 ort/openssl deps →
calibration cross-compiles clean for the Pi.
- **Security (must-fix before LAN):**
- `--token` / CALIBRATE_TOKEN bearer-auth middleware on every route; warns if
bound non-loopback without a token.
- sanitize client-supplied `room_id` to [A-Za-z0-9_-] (≤64) before it reaches
the baseline write path — kills the `../` file-write primitive. + test.
- **Perf:** stop locking shared status + cloning SessionStatus on every UDP
frame — counters/snapshot flush on the 200 ms tick instead (no CPU
starvation under flood). finalize write moved to async `tokio::fs::write`.
- **Docs:** ADR-151 STALE wording matches the impl (baseline-id change;
drift-threshold = P6 refinement); integration doc gets the
`--no-default-features` build + auth/sanitize notes.
35 calibration + 15 CLI tests (no-default) / 20 CLI (default) pass.
Co-Authored-By: claude-flow <ruv@ruv.net>
`room-watch --node-bank N:path` (repeatable) groups live CSI frames by node_id
and fuses per-node banks via MultiNodeMixture. Validated live on COM8 (node 9,
edge_tier=0): frames grouped + fused end-to-end. True 2-node fusion is covered
by unit tests; a second raw-CSI node is the hardware blocker. 54 tests pass.
Co-Authored-By: claude-flow <ruv@ruv.net>
The max-variance-subcarrier carrier locked onto motion artifacts (not
breathing) and also had an out-of-bounds bug on variable CSI subcarrier
counts. Reverted to the mean-amplitude carrier, which is validated live to
detect breathing. Phase-based extraction on a stable subcarrier remains the
proper higher-SNR refinement (ADR-151 §4).
Co-Authored-By: claude-flow <ruv@ruv.net>
Integrates the wifi-densepose-calibration crate into the CLI as four
subcommands driving the full Stage 2–5 pipeline against a live ESP32 raw-CSI
stream (edge_tier=0):
- enroll: walks the guided anchor sequence, gates each capture against the
ADR-135 baseline deviation (re-prompts bad anchors), writes labelled features
- train-room: fits the SpecialistBank from the enrollment, persists JSON
- room-status: prints a trained bank's summary
- room-watch: live mixture-of-specialists readout (presence/posture/breathing/
heart/restless) over a rolling window, with anomaly veto + STALE flagging
Per-frame scalar is the mean CSI amplitude (carries presence/motion + breathing
modulation). Validated end-to-end on the live ESP32 (COM8, edge_tier=0): the
real parser → feature extraction → runtime detected breathing (~16–31 BPM) on
hardware. Full multi-anchor enrollment accuracy requires the operator to perform
the poses; phase-based breathing extraction is a noted refinement.
48 tests pass (29 calibration + 19 CLI).
Co-Authored-By: claude-flow <ruv@ruv.net>
Adds `wifi-densepose calibrate-serve` — an Axum HTTP API that wraps the
ADR-135 CalibrationRecorder so a UI (or any client) can drive an empty-room
baseline capture remotely. Stage 1 ("teach the room") of the ADR-151 room
calibration & training pipeline.
A single background task owns the UDP socket (ESP32 0xC511_0001 frames) and
the optional active recorder; HTTP handlers talk to it over an mpsc command
channel and read a shared status snapshot, keeping the &mut recorder
lock-free. CORS permissive so a browser UI can call it.
Endpoints (/api/v1/calibration/*):
GET /health liveness + UDP ingest stats (frames_seen, streaming)
POST /start { tier?, duration_s?, room_id?, min_frames? }
GET /status live progress (state, frames, progress, z, eta) — poll for UI
POST /stop finalize the current session early
GET /result finalized baseline summary (amp/phase-dispersion averages)
GET /baselines list persisted baseline .bin files
Reuses the existing calibrate.rs ESP32 wire parser (made pub(crate)); honest
abort when <10 frames arrive in the window (e.g. ESP32 not streaming).
Verified end-to-end over loopback: start -> 300 replayed HT20 frames ->
state=complete, 52-subcarrier baseline, phase_dispersion_avg=0.00096
(concentrated/valid), persisted to disk; all 6 endpoints exercised.
CLI: 19 tests pass; crate builds clean.
Co-Authored-By: claude-flow <ruv@ruv.net>
Adds a `--min-frames N` flag to `wifi-densepose calibrate` that overrides
the ADR-135 tier minimum (default 600 frames at 20 Hz for HT20).
Motivation: validated end-to-end against a live ESP32-S3 on COM9, freshly
re-provisioned with target-ip = 192.168.1.50 (this host). The firmware
emits CSI at roughly 0.5 Hz in the current quiet RF environment (most
UDP packets are 0xC511_0006 status, not 0xC511_0001 CSI). Waiting 20 min
to collect 600 frames at install time is operator-hostile; raising the
firmware's CSI rate is a separate concern.
When `--min-frames > 0`, the CLI prints a WARN line stating the override
relaxes the phase-concentration guarantee and should not be used in
production. ADR-135 defaults are preserved unchanged.
Live-hardware validation with `--min-frames 10` over 32 s captured 10
real CSI frames from the ESP32, finalised a baseline-real.bin (860 B)
with correct magic 0xCA1B_0001, version 1, tier HT20, and 52 active
subcarriers. End-to-end pipeline confirmed against real hardware, not
just synthetic UDP.
Co-Authored-By: claude-flow <ruv@ruv.net>
Operator-initiated calibration that records 30 s of stationary CSI,
emits a per-subcarrier baseline (amplitude mean+variance via Welford,
phase via circular sin/cos sums with von Mises dispersion), and gates
downstream stages on a deviation z-score. Plugs into multistatic
coherence gating, motion/presence detection, and the new ADR-134 CIR
estimator as a reference-subtracted input.
API surface (under wifi_densepose_signal):
CalibrationConfig::{ht20, ht40, he20, he40}
CalibrationRecorder { record(), finalize(), frames_recorded() }
BaselineCalibration {
subcarriers: Vec<SubcarrierBaseline>,
deviation(&CsiFrame), subtract_in_place(&mut CsiFrame),
to_bytes(), from_bytes()
}
CalibrationDeviationScore { amplitude_z_median, amplitude_z_max,
phase_drift_median, motion_flagged }
CalibrationError { SubcarrierMismatch, TierMismatch,
InsufficientFrames, VersionMismatch, TruncatedBuffer }
Binary baseline format: magic 0xCA1B_0001 + u8 version=1 + u8 tier +
captured_at_unix_s (i64) + frame_count (u64) + num_subcarriers (u32) +
[SubcarrierBaseline; N] as 16 bytes each (amp_mean, amp_variance,
phase_mean, phase_dispersion as f32 LE). Hand-written serialisation so
the format is stable across Rust toolchain versions without serde drift.
CLI: new `wifi-densepose calibrate` subcommand binds a UDP listener
(0xC511_0001 frames), streams them through CalibrationRecorder, prints
a real-time z-score banner per ADR-135 §risk 1 (operator-may-be-moving),
aborts on sustained high deviation, and writes the binary baseline to
disk. Local UDP packet parser duplicated from sensing-server (per ADR
discussion — avoids cross-crate API churn).
Witness: cross-platform-deterministic SHA-256 over the per-subcarrier
quantised baseline profile (u16 LE at 1e-2/1e-4/1e-3, no sort) using
the lesson learnt from the CIR PR #837 libm-jitter fix. Hash:
d6bce07ecb1648e6936561df44bf4a3bfc17bb0ba5f692646b2301d105b52f67
CI guard: new "ADR-135 calibration witness proof (determinism guard)"
step under the Rust Workspace Tests job, adjacent to the existing
ADR-134 CIR guard. Regressions are unambiguously attributable.
Hardware-in-loop validation: full 600-frame capture exercised via the
new scripts/synth-csi-udp.py emitter targeting 127.0.0.1:5005. The CLI
binary received 600 frames at 20 Hz, z_med stable at ~0.7, motion
correctly NOT flagged, finalised baseline written to baseline.bin (860
bytes) with correct magic + version + timestamp in the header. Live
ESP32 capture from COM9 is operator follow-up — requires provisioning
the firmware's UDP target IP to match the host running the CLI.
Test results (cargo test -p wifi-densepose-signal --no-default-features):
lib: 382 pass / 0 fail / 1 ignored
calibration_synthetic: 17 pass / 0 fail
calibration_drift: 5 pass / 0 fail
calibration_roundtrip: 10 pass / 0 fail
cir_*: 9 pass + 6 documented P2 ignores
doctest: 10 pass
Bench: 20 Criterion combinations registered
(recorder_record / recorder_finalize / deviation / record_600 /
to_bytes across HT20/HT40/HE20/HE40 tiers).
Witness: bash scripts/verify-calibration-proof.sh → VERDICT: PASS
Co-Authored-By: claude-flow <ruv@ruv.net>
The Rust port lived two directories deep (rust-port/wifi-densepose-rs/)
without any sibling under rust-port/ that warranted the extra level.
Move the whole workspace up to v2/ to match v1/ (Python) at the same
depth and shorten every cd / build command across the repo.
git mv preserves history for all tracked files. 60 files updated for
path references (CI workflows, ADRs, docs, scripts, READMEs, internal
.claude-flow state). Two manual fixes for relative-cd paths in
CLAUDE.md and ADR-043 that became wrong after the depth change
(cd ../.. → cd ..).
Validated:
- cargo check --workspace --no-default-features → clean (after target/
nuke; the gitignored target/ was carried by the OS rename and had
hard-coded old paths in build scripts)
- cargo test --workspace --no-default-features → 1,539 passed, 0 failed,
8 ignored (same totals as pre-rename)
- ESP32-S3 on COM7 → still streaming live CSI (cb #40300, RSSI -64 dBm)
After-merge follow-up: contributors should `rm -rf v2/target` once and
let cargo regenerate from the new path.
ruv