mirror of
https://github.com/ruvnet/RuView
synced 2026-06-20 12:03:19 +00:00
rUv
5a7f431b0e
* ADR-081: adaptive CSI mesh firmware kernel + scaffolding
Introduces a 5-layer firmware kernel that reframes the existing ESP32
modules as components of a chipset-agnostic architecture and authorizes
adaptive control + a compact feature-state stream as the default upstream.
Layers:
L1 Radio Abstraction Layer — rv_radio_ops_t vtable + ESP32 binding
L2 Adaptive Controller — fast/medium/slow loops (200ms/1s/30s)
L3 Mesh Sensing Plane — anchor/observer/relay/coordinator (spec)
L4 On-device Feature Extr. — rv_feature_state_t (magic 0xC5110006)
L5 Rust handoff — feature_state default; debug raw gated
Files:
docs/adr/ADR-081-adaptive-csi-mesh-firmware-kernel.md (new)
firmware/esp32-csi-node/main/rv_radio_ops.h (new)
firmware/esp32-csi-node/main/rv_radio_ops_esp32.c (new)
firmware/esp32-csi-node/main/rv_feature_state.{h,c} (new)
firmware/esp32-csi-node/main/adaptive_controller.{h,c} (new)
firmware/esp32-csi-node/main/main.c (wire L1+L2)
firmware/esp32-csi-node/main/CMakeLists.txt (add 4 sources)
firmware/esp32-csi-node/main/Kconfig.projbuild (controller knobs)
CHANGELOG.md (Unreleased)
Default policy is conservative: enable_channel_switch and
enable_role_change are off, so behavior matches today's firmware
unless an operator opts in via menuconfig. The pure
adaptive_controller_decide() is exposed for offline unit tests.
Reuses (does not rewrite): csi_collector, edge_processing (ADR-039),
swarm_bridge (ADR-066), secure_tdm (ADR-032), wasm_runtime (ADR-040).
* ADR-081: implement Layers 1/2/4 end-to-end + host tests + QEMU hooks
Turns the ADR-081 scaffolding into a working adaptive CSI mesh kernel:
Layer 1 radio abstraction has an ESP32 binding and a mock binding; Layer 2
adaptive controller runs on FreeRTOS timers; Layer 4 feature-state packet
is emitted at 5 Hz by default, replacing raw ADR-018 CSI as the default
upstream.
New files:
firmware/esp32-csi-node/main/adaptive_controller_decide.c (pure policy)
firmware/esp32-csi-node/main/rv_radio_ops_mock.c (QEMU binding)
firmware/esp32-csi-node/tests/host/Makefile (host tests)
firmware/esp32-csi-node/tests/host/test_adaptive_controller.c
firmware/esp32-csi-node/tests/host/test_rv_feature_state.c
firmware/esp32-csi-node/tests/host/esp_err.h (shim)
firmware/esp32-csi-node/tests/host/.gitignore
Modified:
adaptive_controller.c — includes pure decide.c; emit_feature_state()
wired into fast loop (200 ms = 5 Hz)
rv_radio_ops_esp32.c — get_health() fills pkt_yield + send_fail
csi_collector.{c,h} — pkt_yield/send_fail accessors (ADR-081 L1)
rv_feature_state.h — packed size corrected to 60 bytes
(was incorrectly 80 in initial commit)
main.c — mock binding registered under mock CSI
CMakeLists.txt — rv_radio_ops_mock.c under CSI_MOCK_ENABLED
scripts/validate_qemu_output.py — 3 new ADR-081 checks (17/18/19)
docs/adr/ADR-081-*.md — status → Accepted (partial);
implementation-status matrix; measured
benchmarks (decide 3.2 ns, CRC32 614 ns);
bandwidth 300 B/s @ 5 Hz (99.7% vs raw);
verification section
CHANGELOG.md — artifact-level entries
Tests (host, gcc -O2 -std=c11):
test_adaptive_controller: 18/18 pass, decide() = 3.2 ns/call
test_rv_feature_state: 15/15 pass, CRC32(56 B) = 614 ns/pkt, 87 MB/s
sizeof(rv_feature_state_t) == 60 asserted
IEEE CRC32 known vectors verified
Deferred (tracked in ADR-081 roadmap Phase 3/4):
Layer 3 mesh-plane message types, role-assignment FSM, Rust-side mirror
trait in crates/wifi-densepose-hardware/src/radio_ops.rs.
* ADR-081: Layer 3 mesh plane + Rust mirror trait — all 5 layers landed
Fully implements the remaining deferred pieces of the adaptive CSI mesh
firmware kernel. All 5 layers (Radio Abstraction, Adaptive Controller,
Mesh Sensing Plane, On-device Feature Extraction, Rust handoff) are
now implemented and host-tested end-to-end.
Layer 3 — Mesh Sensing Plane (firmware/esp32-csi-node/main/rv_mesh.{h,c}):
* 4 node roles: Unassigned / Anchor / Observer / FusionRelay / Coordinator
* 7 message types: TIME_SYNC, ROLE_ASSIGN, CHANNEL_PLAN,
CALIBRATION_START, FEATURE_DELTA, HEALTH, ANOMALY_ALERT
* 3 auth classes: None / HMAC-SHA256-session / Ed25519-batch
* Payload types: rv_node_status_t (28 B), rv_anomaly_alert_t (28 B),
rv_time_sync_t (16 B), rv_role_assign_t (16 B),
rv_channel_plan_t (24 B), rv_calibration_start_t (20 B)
* 16-byte envelope + payload + IEEE CRC32 trailer
* Pure rv_mesh_encode()/rv_mesh_decode() plus typed convenience encoders
* rv_mesh_send_health() + rv_mesh_send_anomaly() helpers
Controller wiring (adaptive_controller.c):
* Slow loop (30 s default) now emits HEALTH
* apply_decision() emits ANOMALY_ALERT on transitions to ALERT /
DEGRADED
* Role + mesh epoch tracked in module state; epoch bumps on role
change
Layer 5 — Rust mirror (crates/wifi-densepose-hardware/src/radio_ops.rs):
* RadioOps trait mirrors rv_radio_ops_t vtable
* MockRadio backend for offline tests
* MeshHeader / NodeStatus / AnomalyAlert types mirror rv_mesh.h
* Byte-identical IEEE CRC32 (poly 0xEDB88320) verified against
firmware test vectors (0xCBF43926 for "123456789")
* decode_mesh / decode_node_status / decode_anomaly_alert / encode_health
* 8 unit tests, including mesh_constants_match_firmware which asserts
MESH_MAGIC/VERSION/HEADER_SIZE/MAX_PAYLOAD match rv_mesh.h
byte-for-byte
* Exported from lib.rs
* signal/ruvector/train/mat crates untouched — satisfies ADR-081
portability acceptance test
Tests (all passing):
test_adaptive_controller: 18/18 (C, decide() 3.2 ns/call)
test_rv_feature_state: 15/15 (C, CRC32 87 MB/s)
test_rv_mesh: 27/27 (C, roundtrip 1.0 µs)
radio_ops::tests (Rust): 8/8
--- total: 68/68 assertions green ---
Docs:
* ADR-081 status flipped to Accepted
* Implementation-status matrix updated; L3 + Rust mirror both
marked Implemented
* Benchmarks table extended with rv_mesh encode+decode roundtrip
* Verification section updated with cargo test invocation
* CHANGELOG: two new entries for L3 mesh plane + Rust mirror
Remaining follow-ups (Phase 3.5 polish, not blocking):
* Mesh RX path (UDP listener + dispatch) on the firmware
* Ed25519 signing for CHANNEL_PLAN / CALIBRATION_START
* Hardware validation on COM7
* Add test_rv_mesh to host-test .gitignore
Fixes an untracked-file warning from the repo stop-hook: the compiled
binary was built by make but the .gitignore update was missed in
8dfb031. No source changes.
* Fix implicit decl of emit_feature_state in adaptive_controller
fast_loop_cb calls emit_feature_state() at line 224, but the static
definition is at line 256. GCC treats the implicit declaration as
non-static, then the real static definition conflicts, and
-Werror=all promotes both to hard build errors.
Add a forward declaration above the first use. Unblocks ESP32-S3
firmware build and all QEMU matrix jobs.
Co-Authored-By: claude-flow <ruv@ruv.net>
---------
Co-authored-by: Claude <noreply@anthropic.com>
60 lines
2.3 KiB
Makefile
60 lines
2.3 KiB
Makefile
# Host-side unit tests for ADR-081 pure-C logic.
|
|
#
|
|
# These tests exercise adaptive_controller_decide() and the rv_feature_state
|
|
# helpers (CRC32, finalize) using plain gcc/clang, with a minimal esp_err.h
|
|
# shim. No ESP-IDF, no FreeRTOS, no QEMU required.
|
|
#
|
|
# Usage:
|
|
# cd firmware/esp32-csi-node/tests/host
|
|
# make
|
|
# ./test_adaptive_controller
|
|
# ./test_rv_feature_state
|
|
|
|
MAIN_DIR := ../../main
|
|
CC ?= cc
|
|
CFLAGS ?= -O2 -std=c11 -Wall -Wextra -Wno-unused-parameter \
|
|
-D_POSIX_C_SOURCE=199309L \
|
|
-I. -I$(MAIN_DIR)
|
|
LDLIBS ?= -lrt
|
|
|
|
# Pure-C sources under test. We compile only the files that have no
|
|
# ESP-IDF dependency in their bodies: rv_feature_state.c is 100% pure.
|
|
# adaptive_controller.c uses FreeRTOS for the timer plumbing, so for the
|
|
# host test we compile only the decide() portion by isolating it in a
|
|
# small unity file (TEST_ADAPT_PURE below).
|
|
FEATURE_STATE_SRCS := $(MAIN_DIR)/rv_feature_state.c
|
|
|
|
# adaptive_controller.c pulls in FreeRTOS headers that don't exist on
|
|
# host; we include its decide() function by defining TEST_ADAPT_PURE
|
|
# before including the .c. The decide() body itself has no ESP-IDF deps.
|
|
# Simpler: just recompile decide() here via a small shim.
|
|
|
|
TESTS := test_adaptive_controller test_rv_feature_state test_rv_mesh
|
|
|
|
all: $(TESTS)
|
|
|
|
test_adaptive_controller: test_adaptive_controller.c $(MAIN_DIR)/adaptive_controller_decide.c $(MAIN_DIR)/adaptive_controller.h $(MAIN_DIR)/rv_radio_ops.h
|
|
$(CC) $(CFLAGS) test_adaptive_controller.c $(MAIN_DIR)/adaptive_controller_decide.c -o $@ $(LDLIBS)
|
|
|
|
test_rv_feature_state: test_rv_feature_state.c $(FEATURE_STATE_SRCS) $(MAIN_DIR)/rv_feature_state.h $(MAIN_DIR)/rv_radio_ops.h
|
|
$(CC) $(CFLAGS) test_rv_feature_state.c $(FEATURE_STATE_SRCS) -o $@ $(LDLIBS)
|
|
|
|
# Mesh plane encoder/decoder: compile rv_mesh.c with RV_MESH_HOST_TEST
|
|
# so the firmware-only send helpers (stream_sender, esp_log) are hidden.
|
|
test_rv_mesh: test_rv_mesh.c $(MAIN_DIR)/rv_mesh.c $(MAIN_DIR)/rv_mesh.h $(FEATURE_STATE_SRCS) $(MAIN_DIR)/rv_radio_ops.h
|
|
$(CC) $(CFLAGS) -DRV_MESH_HOST_TEST=1 \
|
|
test_rv_mesh.c $(MAIN_DIR)/rv_mesh.c $(FEATURE_STATE_SRCS) \
|
|
-o $@ $(LDLIBS)
|
|
|
|
check: all
|
|
./test_adaptive_controller
|
|
@echo ""
|
|
./test_rv_feature_state
|
|
@echo ""
|
|
./test_rv_mesh
|
|
|
|
clean:
|
|
rm -f $(TESTS) *.o
|
|
|
|
.PHONY: all check clean
|